| Cvar | Default Value | Description |
| activeAction | „“ | |
| arch | „linux x86_64“ | |
| bot_aasoptimize | „0“ | |
| bot_challenge | „0“ | |
| bot_debug | „0“ | |
| bot_developer | „0“ | |
| bot_enable | „1“ | |
| bot_fastchat | „0“ | |
| bot_forceclustering | „0“ | |
| bot_forcereachability | „0“ | |
| bot_forcewrite | „0“ | |
| bot_grapple | „0“ | |
| bot_groundonly | „1“ | |
| bot_interbreedbots | „10“ | |
| bot_interbreedchar | „“ | |
| bot_interbreedcycle | „20“ | |
| bot_interbreedwrite | „“ | |
| bot_maxdebugpolys | „2“ | |
| bot_minplayers | „2“ | Minimum number of players per team to be filled with bots if necessary, DM means all are considered to be in one team. |
| bot_nochat | „0“ | Should bots be prevented from sending chat messages? 1=yes, 0 =no |
| bot_pause | „0“ | |
| bot_reachability | „0“ | |
| bot_reloadcharacters | „0“ | |
| bot_report | „0“ | |
| bot_rocketjump | „1“ | |
| bot_testichat | „0“ | |
| bot_testrchat | „0“ | |
| bot_testsolid | „0“ | |
| bot_thinktime | „100“ | |
| bot_visualizejumppads | „0“ | |
| capturelimit | „8“ | Capture limit at which the map ends, only affects CTF matches |
| cg_autoswitch | „1“ | Should the game automatically switch to weapons that have just been collected? (2=yes (to most powerful), 1=safe (no splash damage weapons), 0=no) |
| cg_bobpitch | „0.002“ | Determines how strongly the player „swings“ when walking, 0 switches the sway off completely. |
| cg_bobroll | „0.002“ | Determines how strongly the player „wiggles forwards/backwards“ when walking, 0 switches off the wiggle completely. |
| cg_bobup | „0.005“ | Determines how strongly the player „oscillates“ when walking, 0 switches off the oscillation completely. |
| cg_crosshairHealth | „1“ | |
| cg_crosshairSize | „24“ | Size of the crosshairs in px. |
| cg_crosshairX | „0“ | |
| cg_crosshairY | „0“ | |
| cg_deferPlayers | „1“ | Delay of model shop? 1=yes, 0=no, delays the reloading of models when other players join, so it's not exactly the moment of entering the server. The reload will take place at the next spawning. |
| cg_draw2D | „1“ | Should 2D images be used? (1 = yes, 0 = no). This mostly affects the HUD. If set to no, then the entire HUD is hidden. |
| cg_draw3dIcons | „1“ | 3d-display of items on? 1 = yes, 0 = no |
| cg_drawAmmoWarning | „1“ | Should there be a warning when the ammunition count is low? (1=yes, 0=no) |
| cg_drawAttacker | „1“ | Displays the opponent's name when you face them. |
| cg_drawCrosshair | „1“ | Which crosshairs are displayed? (0=none, otherwise numbered up to 10) |
| cg_drawCrosshairNames | „1“ | Should the player names be displayed at the crosshairs when both are close? (1=yes, 0=no) |
| cg_drawFPS | „0“ | Should the current FPS rate be displayed? (1=yes, 0=no) |
| cg_drawGun | „1“ | Should the model of the weapon currently in use be drawn? (1=yes, 0=no) If no, you have a little more overview and the FPS rate increases a little, but which weapon you are currently using, you have to find out another way. |
| cg_drawIcons | „1“ | Should icons for armor, health, and ammo be displayed in the HUD? 1=yes, 0=no |
| cg_drawRewards | „1“ | |
| cg_drawSnapshot | „0“ | |
| cg_drawStatus | „1“ | |
| cg_drawTeamOverlay | „0“ | Should a team overlay be displayed? 1=yes, 0=no |
| cg_drawTimer | „0“ | Show timer 1 = yes, 0 = no |
| cg_forceModel | „0“ | Are the same models used for all players in multiplayer (1=yes, 0=no)? Has advantages especially when people run around with models you don't have yourself. Otherwise they get random models, or your own model anyways. But it has the disadvantage that you can't distinguish individual players from each other anymore. |
| cg_fov | „95“ | |
| cg_gibs | „0“ | Splatter effects, 1 = yes, 0 = no |
| cg_ignoredPlayers | „“ | |
| cg_lagometer | „0“ | Should the lagometer/netgraph be displayed? 1=yes, 0=no |
| cg_marks | „1“ | Should hit marks remain on walls? (1=yes, 0=no) |
| cg_predictItems | „1“ | item predictions? 1=yes, 0=no, should be left at 0 with good connectivity, because on 1 it sometimes results in items incorrectly reported as collected at the client, which were not picked up at all |
| cg_runpitch | „0.002“ | Determines how much the player „swings“ when running, 0 switches the sway off completely. |
| cg_runroll | „0.005“ | Determines how much the player „wiggles forwards/backwards“ during running, 0 switches off the wiggle completely |
| cg_shadows | „1“ | Should shadows be displayed? (2=volumetric, 1=spherical, 0=none), see also r_stencilbits, mode 2 must be supported by the graphics card |
| cg_simpleItems | „0“ | Should items be displayed in 3D (1=no, 0=yes)? 2D looks worse, but increases the FPS |
| cg_stereoSeparation | „0“ | |
| cg_teamChatHeight | „0“ | |
| cg_teamChatTime | „3000“ | |
| cg_viewsize | „100“ | |
| cg_zoomfov | „22.5“ | |
| cl_allowDownload | „1“ | Should missing files be downloaded from servers automatically? 1=yes, 0=no |
| cl_anglespeedkey | „1.500000“ | |
| cl_anonymous | „0“ | |
| cl_autoRecordDemo | „0“ | |
| cl_aviFrameRate | „25“ | |
| cl_aviMotionJpeg | „1“ | |
| cl_consoleHistory | „“ | |
| cl_debugMove | „0“ | |
| cl_freelook | „1“ | |
| cl_freezeDemo | „0“ | |
| cl_maxpackets | „30“ | packets per second sent to the server, 30 is for V90 modem, for DSL or dedicated lines you can certainly go further up here |
| cl_maxPing | „800“ | |
| cl_motd | „1“ | Enables message of the day. |
| cl_mouseAccel | „0“ | |
| cl_nodelta | „0“ | Deactivate delta compression? 1=yes, 0=no, you should always leave if at 0 |
| cl_noprint | „0“ | |
| cl_packetdup | „1“ | Package duplication, helpful in case of loss, because packages are sent multiple times |
| cl_paused | „0“ | |
| cl_pitchspeed | „140“ | |
| cl_run | „1“ | |
| cl_running | „1“ | |
| cl_showmouserate | „0“ | Shows the update rate of your mouse device. |
| cl_shownet | „0“ | |
| cl_showSend | „0“ | |
| cl_showTimeDelta | „0“ | |
| cl_timeNudge | „0“ | Simulate ping lagg, negative values can reduce problems when playing online (-½-use average ping), see also this |
| cl_timeout | „200“ | |
| cl_yawspeed | „140“ | |
| cm_playerCurveClip | „1“ | |
| color | „4“ | |
| color1 | „4“ | |
| color2 | „5“ | |
| com_altivec | „0“ | |
| com_blood | „0“ | Blood on? 1 = yes, 0 = no |
| com_buildScript | „0“ | |
| com_hunkMegs | „128“ | Working memory in MB that EF is allowed to use as a maximum. System limits such as the 2 GB limit under XP cannot be exceeded! |
| com_introplayed | „1“ | |
| com_maxfps | „125“ | Maximum frame rate, you should rather not use it, rather use cl_maxpackets. |
| com_showtrace | „0“ | |
| com_speeds | „0“ | |
| com_zoneMegs | „32“ | Probably(!) the memory in MB EF is allowed to use for items. |
| con_notifytime | „10“ | |
| conAlpha | „1.6“ | |
| debuggraph | „0“ | |
| dedicated | „0“ | |
| developer | „0“ | |
| dmflags | „0“ | no falling damage = 8, fixed field of vision = 16 and footsteps = 32, sums are allowed. |
| fixedtime | „0“ | |
| fraglimit | „10“ | Maximum score for any player, at which the match will stop. |
| fs_basepath | „“ | |
| fs_debug | „0“ | |
| fs_game | „“ | |
| g_adaptrespawn | „1“ | |
| g_arenasFile | „“ | sets the file name to be used for map rotation, bot names and game type for each arena (default: scripts/arenas.txt within the pk3 file) |
| g_banIPs | „“ | ban specified ip address from connecting to your server |
| g_botsFile | „“ | sets the file name to be used for setting up the bots configuration and characters for each bot (default: scripts/bots.txt within the pk3 file) |
| g_classChangeDebounceTime | „180“ | |
| g_dmgmult | „1“ | Damage multiplier, default is 1. |
| g_dowarmup | „0“ | Should the warmup be turned on? 1 = Yes, 0 = No |
| g_filterBan | „1“ | Activate automated bans by filters 1 = Yes, 0 = No |
| g_forcerespawn | „0“ | Number of seconds until a client is automatically respawned, if the client doesn't do it by itself. Set it to 0 to disable force respawn. |
| g_friendlyfire | „1“ | Is friendly fire on? 1 = yes, 0 = no |
| g_gametype | „0“ | Game type, 0 = FFA, 1 = 1 on 1 (Tournament), 2 = Single player, 3 = Team Holomatch, 4 = CTF |
| g_ghostRespawn | „5“ | The time of spawn protection in seconds. |
| g_gravity | „800“ | Intensity of gravity |
| g_holoIntro | „0“ | Should the holodeck intro be played when joining? 1=yes, 0 =no |
| g_intermissionTime | „20“ | |
| g_knockback | „500“ | Intensity of movement when impacted by explosions |
| g_language | „english“ | |
| g_log | „“ | Sets the name of the log file, will be created automatically in the configuration directory (e.g. $Home/.stvef/baseEF or baseEF of the game) |
| g_logSync | „1“ | toggle the logging to append to the existing file and not overwrite it |
| g_maxGameClients | „0“ | Set maximum number of players who may join the match (not the server!); the remainder of clients are forced to spectate. |
| g_nojointimeout | „120“ | |
| g_pModActionHero | „0“ | Mode Action Hero, one player is the Hero, has more health, more weapons, but is the preferred only target, because his frag counts 5 points, and the attacker himself becomes the Hero, 1=activated, 0=deactivated. |
| g_pModAssimilation | „0“ | Assimilation mode, Starfleet battles Borg. Either you play for Starfleet and try to eliminate the Borg Queen, or as Borg Drone/Queen, and assimilate the opposing team to win more drones and finally win the match, 1 = activated, 0 = deactivated. |
| g_pModDisintegration | „0“ | Disintegration mode, there is only one weapon that kills immediately, can be combined with g_pModElimination, 1 = enabled, 0 = disabled. |
| g_pModElimination | „0“ | Whoever was killed is out until the last player is determined to be the winner, 1 = activated, 0 = deactivated. |
| g_pModSpecialties | „0“ | Specialist mode, each player has a class with special abilities and weapons, 1 = enabled, 0 = disabled. |
| g_random_skin_limit | „4“ | |
| g_spAwards | „“ | |
| g_speed | „300“ | Running speed |
| g_spScores1 | „\l0\1“ | |
| g_spScores2 | „“ | |
| g_spScores3 | „“ | |
| g_spScores4 | „“ | |
| g_spScores5 | „“ | |
| g_spSkill | „1“ | |
| g_spVideos | „“ | |
| g_team_group_blue | „“ | |
| g_team_group_red | „“ | |
| g_teamAutoJoin | „0“ | Should a starting player be automatically assigned to the team with the lower score? 1 = yes, 0 = no |
| g_teamForceBalance | „1“ | Should the server automatically balance teams in terms of player numbers? 1 = yes, 0 = no |
| g_warmup | „5“ | Warmup time in seconds, during which frags and captures do not count for the score board |
| g_weaponrespawn | „5“ | Time in seconds for picked up weapons to reappear on their map spots |
| graphheight | „32“ | |
| graphscale | „1“ | |
| graphshift | „0“ | |
| handicap | „100“ | |
| in_joyBallScale | „0.02“ | |
| in_joystick | „0“ | Should a gamepad/joystick be used? (1=yes, 0=no) |
| in_midi | „0“ | |
| in_midichannel | „1“ | |
| in_mididevice | „0“ | |
| in_midiport | „1“ | |
| in_mouse | „-1“ | How should a mouse be used as an input device? -1 means the position of the mouse cursor is taken in windowed mode and movement calculated by difference to the last position. After each frame the mouse pointer is centered. This is the most accurate measure, but may have unwanted side effects with clippin on the edges. This also means, the mouse control is affected by your systems pointer acceleration settings. 0 means no (mouse off). 1 means DirectInput access, so the systems acceleration settings don't take effect. It also might add a few milliseconds of delay for pressed mouse buttons. |
| journal | „0“ | |
| joy_threshold | „0.150000“ | |
| joy_xbutton | „1“ | |
| joy_ybutton | „0“ | |
| k_language | „english“ | |
| logfile | „1“ | Should a log file be created? 1 = yes, 0 = no |
| m_filter | „0“ | Mouse filter, if set to 1 instead of 0 (default), mouse movements will be more smooth |
| m_forward | „0.25“ | |
| m_pitch | „0.022000“ | |
| m_side | „0.25“ | |
| m_yaw | „0.022“ | |
| mapname | „nomap“ | |
| model | „model/color“ | Model/Skin of the player |
| name | „Redshirt“ | Name of the player |
| net_ip | „0.0.0.0“ | IPv4 address of the local network card to be listened on, not used in ioQuake derivatives |
| net_noipx | „0“ | Should IPX be deactivated? 1=yes, 0=no, should be 1, if you can't use IPX (e.g. Win Vista and newer or on 64 bit) |
| net_noudp | „0“ | Should UDP be deactivated? 1=yes, 0=no, should always be 0, because IPX doesn't work via internet anyway. |
| net_port | „27960“ | UDPv4 port on which the EF server will be made accessible for connections |
| net_qport | „20269“ | the source port your client utilizies |
| net_socksEnabled | „0“ | |
| net_socksPassword | „“ | |
| net_socksPort | „1080“ | |
| net_socksServer | „“ | |
| net_socksUsername | „“ | |
| nextmap | „“ | |
| password | „“ | set password |
| protocol | „24“ | |
| r_allowExtensions | „1“ | |
| r_allowSoftwareGL | „0“ | Should the game be software rendered? (1=yes, 0=no), only makes sense if you actually have difficulties with normal rendering |
| r_ambientScale | „0.6“ | |
| r_clear | „0“ | Should gaps between textures be filled? (1=yes, 0=no) Looks better, but consumes more computing power. |
| r_colorbits | „32“ | Color depth, 16 or 32 (bit), see also r_depthbits |
| r_colorMipLevels | „0“ | |
| r_customaspect | „1“ | |
| r_customheight | „1080“ | |
| r_customwidth | „1920“ | |
| r_debuglight | „0“ | |
| r_debugSort | „0“ | |
| r_debugSurface | „0“ | |
| r_depthbits | „24“ | Similar to r_colorbits but when 0 the settings for the Windows desktop are used. |
| r_detailtextures | „1“ | Should improved textures be used? (1=yes, 0=no) |
| r_directedScale | „1“ | |
| r_displayRefresh | „0“ | Screen refresh rate, should be set to the same value as the maximum output of the monitor. On modern LCD monitors, the maximum refresh rate is 60, or 120 for 3D capable monitors. |
| r_dlightBacks | „1“ | |
| r_drawBuffer | „GL_BACK“ | |
| r_drawentities | „1“ | |
| r_drawSun | „0“ | Should sunlight be rendered? 1=yes, 0=no, Only applies to maps with sunlight on them. |
| r_drawworld | „1“ | |
| r_dynamiclight | „1“ | Should dynamic lights be rendered (e.g. shimmering lights from explosions)? 1=Yes, 0=No |
| r_ext_compiled_vertex_array | „1“ | |
| r_ext_compress_lightmaps | „0“ | |
| r_ext_compress_textures | „1“ | Should compressed textures be used? 1=yes, 0=no, switched on looks same, but puts a much heavier load on the cpu while using less RAM |
| r_ext_compressed_textures | „0“ | |
| r_ext_gamma_control | „1“ | |
| r_ext_max_anisotropy | „2“ | |
| r_ext_multitexture | „1“ | Should multi-texturing be used (multiple layers of textures simultaneously)? 1=yes, 0=no |
| r_ext_preferred_tc_method | „0“ | |
| r_ext_texture_env_add | „1“ | |
| r_ext_texture_filter_anisotropic | „1“ | Should anisotropic filters be used? 1=yes, 0=no, you should use it for optical reasons, everything further away will be displayed sharper then |
| r_facePlaneCull | „1“ | |
| r_fastsky | „0“ | Should sky and portals not be rendered instead of the visually more appealing variant? 1=Yes, 0=No |
| r_finish | „1“ | Set to 1 if laggs occur due to problems with the input devices. This will make the FPS slightly less, but the timings will be fine again. |
| r_flareFade | „7“ | |
| r_flares | „0“ | |
| r_flareSize | „40“ | |
| r_fullbright | „0“ | |
| r_fullscreen | „1“ | |
| r_gamma | „1.000000“ | Gamma value (brightnes) |
| r_glDriver | „libGL.so.1“ | |
| r_GLlibCoolDownMsec | „0“ | |
| r_ignore | „1“ | |
| r_ignoreFastPath | „1“ | |
| r_ignoreGLErrors | „1“ | |
| r_ignorehwgamma | „0“ | If set to 1, EF itself controls the gamma values (or you can adjust them from the game), otherwise the graphics card takes control, affecting the entire system, instead of just EF. It is recommended to not use the default 0. |
| r_inGameVideo | „1“ | |
| r_intensity | „1“ | |
| r_lastValidRenderer | „“ | |
| r_lightmap | 0 | Turns on the light map view, where only the light mapping is displayed, not the actual textures. 0 is the default (off), 1 turns it on. |
| r_lockpvs | „0“ | |
| r_lodbias | „0“ | Model detail level, values between 0 and 2 are allowed, with 2 least detailed, but highest FPS rate. |
| r_lodCurveError | „250“ | |
| r_lodscale | „5“ | |
| r_logFile | „0“ | |
| r_lowEndVideo | „0“ | |
| r_mapOverBrightBits | „1“ | brightness of the maps, 0=no additional brightening, 1 is normal |
| r_measureOverdraw | „0“ | |
| r_mode | „-1“ | |
| r_nobind | „0“ | |
| r_nocull | „0“ | Should everything be rendered, or only visible parts? 0=all, 1=visible only |
| r_nocurves | „0“ | Should curves be rendered? 1=yes, 0=no, has a strong effect on appearance and performance |
| r_noportals | „0“ | |
| r_norefresh | „0“ | Should all screen updates be omitted? 1=yes, 0=no, should stay at 0, otherwise nothing else will happen. |
| r_novis | „0“ | |
| r_offsetfactor | „-1“ | |
| r_offsetunits | „-2“ | |
| r_overBrightBits | „1“ | total brightness, 0 = no additional brightening, 1 is normal |
| r_picmip | „0“ | Mipmap level, values from 0 to 4 are allowed, affects image quality, 4=fastest, 0=optically best, but slowest setting |
| r_portalOnly | „0“ | |
| r_primitives | „0“ | |
| r_printShaders | „0“ | |
| r_railCoreWidth | „6“ | |
| r_railSegmentLength | „32“ | |
| r_railWidth | „16“ | |
| r_roundImagesDown | „1“ | |
| r_showcluster | „0“ | |
| r_showImages | „0“ | |
| r_shownormals | „0“ | |
| r_showsky | „0“ | |
| r_showtris | „0“ | |
| r_simpleMipMaps | „1“ | |
| r_singleShader | „0“ | |
| r_skipBackEnd | „0“ | |
| r_smp | „0“ | Should multiple processors be used? 1=yes, 0=no |
| r_speeds | „0“ | |
| r_stencilbits | „8“ | template buffer, affects volumetric shadows (cg_shadows), should be set to 8 when used. |
| r_stereo | „0“ | |
| r_subdivisions | „4“ | Complexity of curves, 1 is the optically best, but slowest value, 999 is the fastest, but most angular value |
| r_swapInterval | „0“ | Vsync, should game fps and actual (vertical) repetition frequency be adjusted? 1=yes, 0=no, 0 is actually only for benchmarks, since more than the physical repetition frequency is not displayed anyway |
| r_texturebits | „32“ | Should 16 or 32 bit textures be used? |
| r_texturebitslm | „0“ | |
| r_textureMode | „GL_LINEAR_MIPMAP_LINEAR“ | texture mode, can have the values GL_NEAREST_MIPMAP_NEAREST (worst), GL_LINEAR_MIPMAP_NEAREST (linear, default), GL_NEAREST_MIPMAP_LINEAR (bilinear=second best) or GL_LINEAR_MIPMAP_LINEAR (trilinear=best) |
| r_verbose | „0“ | |
| r_vertexLight | „0“ | |
| r_znear | „4“ | |
| rate | „25000“ | Data rate in bytes/sec., depends on own connection speed, can help with too high pings if you reduce the value. |
| rconAddress | „“ | Variable for setting address of the remote server on the client |
| rconPassword | „“ | Sets the password for rcon commands server-sided |
| s_alDopplerFactor | „1.0“ | |
| s_alDopplerSpeed | „2200“ | |
| s_alDriver | „libopenal.so.1“ | |
| s_alGain | „1.0“ | |
| s_alMaxSpeakerDistance | „1024“ | |
| s_alPrecache | „1“ | |
| s_alSources | „96“ | |
| s_bloat | „2.0“ | |
| s_distance | „100.0“ | |
| s_doppler | „1.0“ | Doppler effect, from 0 to 10, should normally be left at default value (= not in config or commented out) |
| s_initsound | „1“ | Should sound be used at all? 1=yes, 0=no (is not the same as volume at 0!) |
| s_khz | „22“ | Sample rate, 22 or 11 (kHz) |
| s_language | „english“ | |
| s_leafnum | „0“ | |
| s_max_distance | „1000.0“ | |
| s_min_distance | „3.0“ | |
| s_mixahead | „0.2“ | Pre-calculation of sound, the higher, the higher the system load |
| s_mixPreStep | „0.05“ | |
| s_musicvolume | „0.15“ | Music volume from 0 to 1 |
| s_numpolys | „400“ | Maximum number of A3D polygons used for calculation, the higher, the better the 3D sounds, but the more system load, 0=off |
| s_occ_eq | „0.75“ | |
| s_occfactor | „0.5“ | |
| s_polykeep | „1000000000“ | |
| s_polyreflectsize | „10000000“ | |
| s_polysize | „10000000“ | |
| s_refdelay | „2.0“ | |
| s_refgain | „0.45“ | |
| s_rolloff | „1.0“ | |
| s_separation | „0.5“ | |
| s_useOpenAL | „1“ | |
| s_volume | „0.5“ | Volume from 0 to 1 |
| scr_conspeed | „3“ | |
| sensitivity | „12.427586“ | |
| server1 | „“ | |
| server10 | „“ | |
| server11 | „“ | |
| server12 | „“ | |
| server13 | „“ | |
| server14 | „“ | |
| server15 | „“ | |
| server16 | „“ | |
| server2 | „“ | |
| server3 | „“ | |
| server4 | „“ | |
| server5 | „“ | |
| server6 | „“ | |
| server7 | „“ | |
| server8 | „“ | |
| server9 | „“ | |
| sex | „male“ | |
| showdrop | „0“ | |
| showpackets | „0“ | |
| snaps | „50“ | World updates sent to client per second, 30 is a good start value, but may need to be adjusted depending on your connection. |
| sv_allowDownload | „0“ | Are uploads to the clients allowed? 1=yes, 0=no |
| sv_cheats | „0“ | allows cheats, only works, if the current map was called with devmap or when in single player campaign |
| sv_floodProtect | „1“ | toggle server flood protection to keep players from bringing the server down |
| sv_fps | „20“ | set server side frames per second |
| sv_hostname | „“ | Name of the server, displayed in the server list and during connecting |
| sv_keywords | „“ | set list of keywords for server browsers that support searching server lists |
| sv_killserver | „0“ | Are clients able to issue a killserver command? 1=yes, 0=no |
| sv_lanForceRate | „1“ | if this is enabled and dedicated mode is not 2, clients on your same subnet will ignore the rate value and will get all the snapshots the server calculates |
| sv_mapChecksum | „“ | current map’s bsp checksum, server-internal only |
| sv_master1 | „master.stvef.org“ | |
| sv_master2 | „master.stef1.ravensoft.com:27953“ | |
| sv_master3 | „efmaster.tjps.eu“ | |
| sv_master4 | „“ | |
| sv_master5 | „“ | |
| sv_maxclients | „8“ | Maximum number of clients allowed to be connected simultaneously, max is 64 |
| sv_maxPing | „0“ | highest permitted ping on the server |
| sv_maxRate | „6000“ | option to force all clients to play with a max rate, this can be used to limit the advantage of low ping players or to cap bandwidth utilization for a server |
| sv_minPing | „0“ | smallest permitted ping |
| sv_minRate | „0“ | set the minimum rate allowed on the server |
| sv_padPackets | „0“ | force server to pad snapshot packets |
| sv_pakNames | „“ | names of the loaded pk3 files, only active, when sv_pure is set to 1 |
| sv_paks | „“ | checksums of the loaded pk3 files |
| sv_paused | „0“ | shows pausing state of the server, read-only, not used on ioQuake any more |
| sv_privateClients | „0“ | sets the number of client slots reserved for who have the sv_privatepassword of the server set as their password variable. sv_maxclients - sv_privateclients = the number of publicly accessable slots |
| sv_privatePassword | „“ | set server password and requires all clients to use the password command with the correct password to join the server, unless sv_privateClients is set greater than 0. |
| sv_pure | „0“ | Do the files at the client have to have the same checksums and file sets as on the server? 1 = yes, 0 = no |
| sv_reconnectlimit | „3“ | Maximum number of reconnects for clients |
| sv_referencedPakNames | „“ | Names of the pk3 files currently loaded for this map run |
| sv_referencedPaks | | checksums of the pk3 files currently loaded for this map run |
| sv_running | „0“ | server status: Running as a server, but is a map loaded? 1 = yes, 0 = no |
| sv_serverid | „“ | Sets a server ID (use is unknown) |
| sv_showloss | „0“ | Should the loss to the server be displayed? 1 = yes, 0 = no |
| sv_strictAuth | „1“ | should the cd-key on clients be checked? 1 = yes, 0 = no |
| sv_timeout | „200“ | set server timeout time in seconds (duration on the score screen, until the next match will be forced, as long as humans are connected. |
| sv_zombietime | „2“ | Sets the time after which inactive clients (zombies) are kicked. |
| timedemo | „0“ | |
| timegraph | „0“ | |
| timelimit | „0“ | Maximum runtime of a map in minutes |
| timescale | „1“ | Sets server timescale modifier |
| ui_browserGameType | „0“ | |
| ui_browserMaster | „0“ | |
| ui_browserShowEmpty | „1“ | |
| ui_browserShowFull | „1“ | |
| ui_browserSortKey | „4“ | |
| ui_cdkeychecked | „1“ | |
| ui_cdkeychecked2 | „1“ | |
| ui_ctf_capturelimit | „8“ | |
| ui_ctf_friendly | „0“ | Friendly fire for CTF? (1 = yes, 0 = no) See also ui_team_friendly |
| ui_ctf_timelimit | „30“ | |
| ui_ffa_fraglimit | „20“ | Frag limit, at which the map ends, applies to all players of a team together in TDM, in assimilation and elimination mode, has no effect on CTF |
| ui_ffa_timelimit | „0“ | |
| ui_initialsetup | „1“ | |
| ui_playerclass | „“ | |
| ui_precacheweapons | „0“ | |
| ui_spSelection | „“ | |
| ui_team_fraglimit | „0“ | |
| ui_team_friendly | „1“ | Friendly Fire on? 1 = yes, 0 = no |
| ui_team_timelimit | „20“ | |
| ui_tourney_fraglimit | „0“ | |
| ui_tourney_timelimit | „15“ | |
| username | „“ | sets player name (nick name) |
| version | „“ | |
| vid_xpos | „3“ | |
| vid_ypos | „22“ | |
| vm_cgame | „0“ | |
| vm_game | „0“ | |
| vm_ui | „0“ | |